The same edgebander can turn out a clean joint on one job and a visible glue line on the next. Board colour, edging material, feed speed and adhesive application all affect the result. So does the hotmelt you put through the machine.
Hutchco stocks Technomelt Dorus EVA hotmelts for different production needs. The choice depends on the work running through your edgebander, the finish you expect and whether your machine uses granules or cartridges.
Here’s where each option earns its place, and what to check before changing adhesive.
Technomelt Dorus edgebanding adhesives
Compare Hutchco’s stocked EVA granules and HolzHer cartridges.
Swipe across each table to compare products.
| Based on | KS 217general use | KS 220/1lower speed | KS 351unfilled | KS 611black glue line |
|---|---|---|---|---|
| Adhesive type | E | E | U | E |
| Colours | ||||
| Feed speed | from 12 m/min | from 10 m/min 6 m/min contour |
from 12 m/min | from 15 m/min |
| Roller temperature | 190-200°C | 180-200°C | 190-200°C | 160-190°C |
| Discreet glue line | ||||
| Technical data | TDS | TDS | TDS | TDS |
Feed speeds and temperatures are taken from the linked Henkel technical data sheets. Confirm machine settings, substrate, edging and primer requirements before production.
Technomelt Dorus EVA granules
The right granule depends on your machine speed, the materials you run and how you want the finished joint to look.
- KS 217 | General production: A versatile EVA hotmelt for common board and edging jobs, including MDF and particle board.
- KS 220/1 | Slower edgebanders: A lower-viscosity option for lower feed speeds, including older machines where clean running and efficient adhesive use matter.
- KS 351 | Discreet joints: An unfilled EVA hotmelt available in white and transparent for work where joint appearance is a priority.
- KS 611 Black | Dark edging: A black EVA hotmelt for dark boards and edging where a light glue line would stand out.
Your board-edge preparation, adhesive coverage and machine settings still affect the result, whichever product you use.
Using a Holzher cartridge edgebander?
| Based on | HKP 25 colour choice | HKP 20 transparent |
|---|---|---|
| Adhesive type | E | U |
| Colours | ||
| Machine system | HolzHer | HolzHer |
| Feed speed | from 10 m/min | from 10 m/min |
| Nozzle temperature | 200-220°C | 200-220°C |
| Technical data | TDS | TDS |
Feed speeds and temperatures are taken from the linked Henkel technical data sheets. Confirm machine settings, substrate, edging and primer requirements before production.
Hutchco’s EVA cartridge options include HKP 25, a general-purpose hotmelt, and HKP 20, an unfilled transparent option with particular suitability for solid wood.
Check the cartridge against your exact machine and the materials you run. The relevant technical data sheet gives the processing guidance; a trial on your own production materials confirms the result.
If the joint is not right, check the whole setup
An open joint, excess adhesive or an edge that pulls away does not automatically call for a different hotmelt. Check the board edge, edging condition, application temperature, adhesive coverage, feed speed and pressure.
The pattern of the problem matters. Does it happen on every job, or only with one board or edging material? Is adhesive transferring evenly? Those observations help identify what to adjust before you change products.
Talk through the job with Hutchco
Tell us your machine model, current hotmelt, feed speed, board and edging materials, and what you want to improve. We can help narrow down the Technomelt Dorus EVA options and provide the relevant technical data sheet.

